PV Module Aging Test Location：首页 > Product Solutions > PV Module Aging Test > Hail Tester

Hail Tester

Product description Specifications Download

Meet the hail test requirements specified in 4.17 clause of IEC 61215-2016.

l Ice ball launcher can be moved.

l Ice bal vertical launching.

l Ice ball speed can be monitored by infrared speedometer.

l Ice ball is launched by compressed air and the compressed air pressure is adjustable according to the ice ball speed.

l Including a variety of fixtures to meet different module structure.

l Ice ball launching point can be located by infrared.

l Including ice ball fixture and low temperature container.

l Ice ball launching point could be programmed before test & the launcher could move as per the program.

Item	Parameters
Launcher verticality	＜1°
Ice ball diameter	25mm, 35mm, 45mm, 55mm, 65mm, 75mm.
Distance between Launcher(velocity sensor) & module	＜1m
Ice ball mold	Silicon
Launching velocity	≤40m/s
Velocity accuracy	±2%
Infrared positioning line	2mm diameter in 10m distance
Distance between hit point and specified point compared to module size.	±5%
Vernier caliper scale	150mm
Vernier caliper accuracy	0.1mm
Electronic balance range	100g
Electronic balance accuracy	1%
Storage container temperature range	-5～0
Temperature control accuracy	±1℃
Temperature uniformity	±2℃
Freezer temperature range	-15～0℃
Temperature uniformity	±5℃
Test Area	3300*2400mm
Compressor capacity	140L/min
Compressor pressure	0.6MPa

Back